Billy Goat MV650SPH Manual De Usuario

 

 

Part No 840099 

10 

Form No 082206A 

 
ASSEMBLY INSTRUCTIONS 

 
 
Your BILLY GOAT 

®

  MV Vacuum was shipped in one carton, completely assembled except for the Hood/Upper 

Handle Assembly. Mounting hardware for the Hood/Upper Handle Assembly is temporarily installed on the lower 
handle and the Housing assembly. 

 

 

READ all safety instructions before assembling unit. 
TAKE CAUTION

 

when removing the unit from the box since Hood/Upper Handle Assembly is 

attached to the unit by cables.

 

 
 
 

Remove unit from carton. Make sure the following items that have been packed with unit: 

Parts bag P/N 840187 

†

 

Owner’s Manual, P/N 840099 

†

 

Declaration of Conformity, P/N 840204 

†

 

Honda Engine Manual 

†

 

Warranty Card, P/N 400972 

†

 Ty-Wraps 

(2 

ea) 

   †     Hardware Bag

 

 

 

 

DISCONNECT spark plug wire before assembling unit.

 

 
 

1. Attach hood assembly to the housing then hold in place 
during the step 2. 
 
NOTE: BE SURE ALL CABLES ARE ROUTED ON THE 
UNDERSIDE OF THE HOOD AND HOUSING. 

 

 

2. Install item #170 center bolt first when aligned with 
a nut on the housing. 

3. Attach rest of hood assembly to the housing using 
corresponding hardware. 

NOTE: You will have to insert the bolt/washer from 
the inside by reaching through the hood. 

 

 

- Two 7/16” wrenches. 

 

1st