Bissell 3120 Manual De Usuario

Descargar
Página de 12
 5
w w w . b i s s e l l . c o m   8 0 0 . 2 3 7 . 7 6 9 1
Transporting cleaner
1. 
To move your cleaner from room to room, put 
the handle in the upright position, tilt the cleaner 
back on its rear wheels, and push forward.
2. 
The cleaner can also be moved by using the 
carrying handle on the front.
Using your cleaner
1. 
Remove the plastic plug guard and dispose. 
2. 
Unclip polarized plug from power cord.
3. 
Rotate the Quick Release cord wrap towards 
floor and slip power cord from upper and lower 
cord wraps.
4. 
Connect power cord plug to a polarized outlet.
5. 
To keep the power cord out of your way 
while cleaning, place it in the cord hook near 
the top of the handle.
Power Switch pedal
The power switch pedal is located on the back of 
the cleaner, under the cord wraps. 
1. 
Step on the power switch to turn the unit 
“On”. The rotating floor brush and suction 
will start. 
2. 
Step on the pedal again to turn the vacuum “Off”. 
O
perations
CAUTION: 
Before using your vacuum, 
make sure the dirt container 
is locked in place, and that 
all filters (inner circular, 
outer circular, and pre-
motor) are in place. Do not 
operate your vacuum 
without these filters.
Tip:
Before cleaning 
under low furniture, 
check for objects 
that might block the 
vacuum hose. Do 
not pick up hard 
or sharp objects 
such as glass, 
nails, screws, coins, 
paper clips, etc. 
with vacuum.
Power 
Switch 
Pedal
Quick 
Release 
Cord 
Wrap
ug010-0291_3120_507.indd   5
ug010-0291_3120_507.indd   5
5/22/07   5:25:16 PM
5/22/07   5:25:16 PM