Bissell 84G9 Manual De Usuario

w w w . b i s s e l l . c o m   8 0 0 . 2 3 7 . 7 6 9 1

Hose  

Wand

1.  Locate the vacuum handle and remove 

the screw packet taped to the base of the 

handle.

2.  Stand the vacuum upright and slide the 

base of the handle firmly into the grooves 

at the top of the vacuum body.

3.  Check to be sure the handle is fitted to the 

vacuum body. If there is a gap in front, 

continue to push firmly until the handle is 

flush.

4.  Insert the screw provided from the screw 

packet into the existing hole. Tighten 

securely with a screwdriver.

1.  Line up tabs on the base of the Twist ‘n 

Snap hose with the corresponding notches 

on the hose collar. Turn the hose to the 

right to lock into place. 

2.  Grasp the Quick Reach Handle and slide 

the end of the hose into the hose wand 

base. Snap the hose into the upper hose 

clip on handle. 

3.  Slide the extension wand and crevice tool 

together into storage clip. 

4.  Snap the combination tool into the storage 

clip. 

5.  Attach the TurboBrush tool by lining up 

with base of holder in handle and push 

back to snap into place.