Bissell 95P1 Manual De Usuario

w w w. b i s s e l l . c o m   8 0 0 . 2 3 7 . 7 6 9 1

Hose  

Wand  

Base

1.  locate the vacuum handle and 

remove the screw packet taped to  

the base of the handle.

2.  stand the vacuum upright and slide 

the base of the handle firmly into 

the grooves at the top of the vacuum 

body.

3.  check to be sure the handle is fitted 

to the vacuum body. if there is a gap 

in front, continue to push firmly until 

the handle is flush.

4.  insert the screw provided from the 

screw packet into the existing hole. 

tighten securely with a screwdriver.

1.  attach the twist ‘n snap™ hose by 

lining up the tabs on the base with the 

corresponding notches on the back of 

the vacuum.

2.  turn the twist ‘n snap hose to the 

right to lock the hose into place.

3.  grasping the Quick Reach handle, 

slide the end of the hose wand onto 

the hose wand base. snap the hose 

into the hose clip.

4.  snap the extension wand and  

the crevice tool together into the  

storage clip.

5.  snap the combination tool into the 

storage clip.

6.  attach the turbobrush tool by  

aligning the small holes near the 

brush roll with the tabs at the bottom 

of turbobrush tool housing. snap 

turbobrush tool into place.