Emerson Model 1700 Manual De Usuario

4.3.1

Configure Volume Flow Type for gas applications

Display (standard)

Not available

Chinese-language
display

Not available

ProLink II

ProLink

> Configuration > Flow > Vol Flow Type

ProLink III

Device Tools

> Configuration > Process Measurement > Flow

Field Communicator Configure > Manual Setup > Measurements > GSV > Volume Flow Type > Standard Gas Volume

Overview

Volume Flow Type

controls whether liquid or gas standard volume flow measurement is

used.

Procedure

Set Volume Flow Type to Gas Standard Volume.

4.3.2

Configure Standard Gas Density

Display (standard)

Not available

Chinese-language
display

Not available

ProLink II

ProLink

> Configuration > Flow > Std Gas Density

ProLink III

Device Tools

> Configuration > Process Measurement > Flow

Field Communicator Configure > Manual Setup > Measurements > GSV > Gas Ref Density

Overview

The Standard Gas Density value is used to convert the measured flow data to the standard
reference values.

Prerequisites

Ensure that Density Measurement Unit is set to the measurement unit you want to use for
Standard Gas Density

Procedure

Set Standard Gas Density to the standard reference density of the gas you are measuring.

Note

ProLink II and ProLink III provide a guided method that you can use to calculate the standard density
of your gas, if you do not know it.

Configure process measurement

Configuration and Use Manual