Honeywell SMV 3000 Manual De Usuario

1/99

SMV 3000 Transmitter User’s Manual

103

The electronics module used in the SMV 3000 transmitter is a two Printed
Wiring Assembly design that includes an integral mounting bracket, we
refer to the PWAs as Main PWA and Temperature or Daughter PWA as a
way to distinguish them.

The plug-in PROM on the main PWA is uniquely characterized to the
meter body of the given transmitter. For this reason, each PROM is given
a 10-digit identification number so you can verify that a replacement
PROM is the correct match for the given transmitter. The PROM
identification number is stamped on the nameplate on the transmitter’s
meter body and appears on a label under the PROM. You can also read the
PROM number using the SCT – See Section 8.2 in this manual for details.

The procedure in Table 28 outlines the steps for replacing the electronics
module or the plug-in PROM. Since you must remove the electronics
module and PROM in either case, you can easily adapt the steps as
required.

Table 28

Replacing Electronics Module or PROM

Turn OFF transmitter power.

ATTENTION  We recommend that you remove the transmitter from

service and move it to a clean area before taking it apart.

Loosen end cap lock and unscrew end cap from electronics side of
housing.