Sennheiser SKP 2000 Manual De Usuario
20
Adjusting settings via the operating menu
Selecting the frequency bank and the channel manually –
“Frequency Preset”
“Frequency Preset”
Overview of the frequency banks and channels:
... correctly
The audio level display “
AF
”
shows full deflection
only during the loudest passages.
... too low
The transmission link is undermodulated. This
results in a signal with high background noise.
results in a signal with high background noise.
Adjust a low input sensitivity when using condenser microphones,
adjust a high input sensitivity when using dynamic microphones.
adjust a high input sensitivity when using dynamic microphones.
When you are in the “
Frequency Preset
” menu item, the RF signal
is deactivated.
Frequency bank
Channels
Type
“
1
” to “
20
”
up to 64 per
frequency
bank
frequency
bank
System bank:
frequencies are factory-preset
frequencies are factory-preset
“
U1
” to “
U6
”
up to 64 per
frequency
bank
frequency
bank
User bank:
frequencies are freely selectable
frequencies are freely selectable
When setting up multi-channel systems, please observe the
following:
Only the factory-preset frequencies within one frequency bank
(“
following:
Only the factory-preset frequencies within one frequency bank
(“
1
” to “
20
”) are intermodulation-free. It is vital to observe the
notes on frequency selection on page 26.
Input sensitivity
adjusted...
adjusted...
Effect/display
Menu
B.Ch: 18.26
Frequency Preset
B.Ch:
546.550MHz
Frequency Preset
18
.26
B.Ch:
Frequency Preset
19.
26
Call up “Frequency
Preset”
Preset”
Select the frequency
bank and confirm
bank and confirm
Select the channel;
store the setting
store the setting
“Stored”
538.475MHz