Sennheiser SR 2050 IEM Manual De Usuario

Using the transmitter

16

When carrying out the 

Sync

 function, the transmitter’s current frequency bank and

channel setting as well as the receiver parameters adjusted via the “

Sync Settings

”

submenu are transferred to the EK 2000 IEM receiver via the infra-red interface.

Carrying out an Easy Setup Sync or a Sync function

The following assumes that you are using the 

Easy Setup Sync

 function for setting up a multi-

channel system. You can also you the 

Easy Setup Sync 

function for establishing a transmis-

sion link between one transmitter and one EK 2000 IEM receiver.

Easy Setup Sync

Sync

왘

Switch all transmitters and one diversity
receiver on.

왘

Switch your transmitter and your
diversity receiver on.

왘

On all transmitters, call up the “

Easy

Setup

” menu item.

The text “

Easy Setup Sync

” and the 

icon appear on the display panels of the
transmitters. 
The RF signal of the transmitters is auto-
matically deactivated.

왘

Press the 

 button 

 on the trans-

mitter.
The 

 icon appears on the display

panels of the transmitter.

왘

Use your diversity receiver to perform a
frequency preset scan and select a
channel within a frequency bank with a
sufficient number of unused channels (see
the instruction manual of the receiver).

–

왘

Place the infra-red interface of the
receiver (see the instruction manual of
the receiver) in front of the infra-red
interface

 of the first transmitter.

The next unused frequency preset is
transferred 

from the receiver to the

transmitter

.

As soon as the transfer is completed, the
display panel of the transmitter displays
the numbers of the transferred fre-
quency bank and channel.

Please note that the transmitter does not
automatically store the frequency bank
and channel setting.

왘

Place the infra-red interface of the
receiver (see the instruction manual of
the receiver) in front of the infra-red
interface

 of your transmitter.

The parameters adjusted via the “

Sync

Settings

” menu item are transferred

from the transmitter to the receiver

. 

In addition, the current frequency bank
and channel setting is transferred.

When the transfer is completed, “

”

appears on the display panel of the trans-
mitter. The transmitter then switches
back to the standard display.

The transferred parameters are automat-
ically adjusted and stored by the receiver. 

The transmission link between trans-
mitter and receiver is now established.