Bradford-White Corp SX) Manual De Usuario

Page 17 

Burner Cleaning Procedure (cont’d) 
Step 12. 

Reassemble the burner assembly and reinstall into the water heater. 

Restore gas supply and check for gas leaks. 
Step 13. 

To resume operation, follow the instructions located on the water heater 

lighting instruction label.  Or, use the lighting instructions located in the water heater 
installation and operating manual.

Pilot Inspection, Testing and Replacement 
Step 1. 

Move the gas control power switch to the “OFF” 

position

Step 2.  

Unplug the water heater from the wall outlet. 

Step 3. 

Turn off the gas supply to the water heater. 

Step 4. 

Remove the outer door. 

Step 5. 

Remove the (4) 1/4” hex drive screws holding the 

right side inner door in place. 

Step 6.

Disconnect the pilot tube 

using a 7/16” wrench and the main burner
feedline with a 3/4” wrench from the gas 
control.

Gas control power 

switch 

Outer door 

(4) 1/4” hex drive 

screws

Right side 

inner door 

Pilot and main 

feedlines 

Damper (water 

heater) power cord 

17