Bradford-White Corp UTW465S60FR*N Manual De Usuario

 Page 33 

Step 1. 

Move the gas control power switch to the 

  “OFF” 

position. 

Step 2. 

Remove the three screws (Phillips screw 

driver) from the control access cover on  the blower as-
sembly and remove cover. 

Step 3. 

Locate blower temperature switch.  

Step 4. 

Disconnect red and yellow wire leads from 

the switch.

Step 5. 

With an appropriate tool such as side cut-

ters, snip the retaining lug from the 
blower housing to allow removal of 
temperature switch. 

Step 6. 

Remove switch from blower housing. 

Step 7. 

Install new switch. Be sure switch is prop-

erly seated in mounting area. 

Step 8. 

Reconnect red and yellow wires to new switch. Wires are inter-

changeable with either terminal. 

Step 9. 

Position the gas control power switch to the “ON” position and

verify proper heater operation.

Step 10. 

Replace control access cover from step 2. 

115 volt potential exposure. Use caution making voltage checks to avoid 

personal injury.

Gas control power 

switch 

Control access 

cover

Blower temperature 

switch location

Snip retaining lug from 

blower housing 

33