Bradford-White Corp Millivolt Manual De Usuario

Sample Specification
The water heater shall be a Bradford White model with a storage capacity of not less than ____________ gallons (____________ liters), a minimum
gas input of ____________ BTUH (KWH), and a minimum recovery of _______ GPH (LPH) at 100°F (56°C). temperature rise. It shall be design
certified by CSA International (formerly AGA and CGA) for 180°F (82°C). application, either with or without a separate storage tank. The tank shall
be lined with Vitraglas

®

vitreous enamel and shall have a bolted hand hole cleanout. The tank shall have ____________ extruded magnesium anode

rods installed in separate head couplings and extended to within three inches of the bottom. The heater shall be insulated with non-CFC foam
insulation. This water heater shall be equipped with an ASME rated T&P relief valve, a continuous pilot ignition system and flue damper. The entire
installation shall be made in compliance with state and local codes and ordinances.