Brother XL-5012 Manual De Usuario
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
54
Button Sewing
XL5030 XL5020 XL5010
Pattern
Stitch Length
Foot
4, 5, 6
4, 5, 6 2, 3, 4 Zigzag Stitch
Any
Button
Sewing Foot
1. Measure the distance between the holes and select the appropriate
pattern with the pattern selection dial.
Distance between holes
Pattern
1.7 mm (1/16")
4
4
2
3.5 mm (9/64")
5
5
3
5 mm (13/64")
6
6
4
XL5030
XL5020
XL5010
2. Attach the button sewing foot.
3. Place the darning plate on the needle plate.
3. Place the darning plate on the needle plate.
(When the machine is equipped with a drop feed lever, lower the
feed dogs by setting the drop feed lever to the up position.)
feed dogs by setting the drop feed lever to the up position.)
4. Place a button between the foot and the fabric and make sure that
the needle enters the holes without hitting the button. If it hits, see
step 1.
step 1.
5. At a slow speed, sew approximately 10 stitches.
6. Remove the material from the machine. Cut the upper and lower
6. Remove the material from the machine. Cut the upper and lower
threads and tie the two threads at the back of the fabric.