Brother S-7200C Manual De Usuario

 

 

S-7200C 

 

29 

４

-１０. Output checking method 

This is used at the following times. 

・ 

When there is a problem with the operation panel PCB 

・ 

When there is a problem with the drive mechanism 

・ 

When you would like to check for broken codes. 

You can check whether the signals being output by the CPU are driving the mechanisms correctly. 

 

Change to output check mode 

 

(While pressing the        key, press the power ON switch.) 

 

Select the item number (A) 

 

 
 

 
 

 

 
 

Return the treadle to the neutral position, and then repeat the operations in steps 2 and 3 above

. 

Press the power OFF switch to turn off the power, and then turn the power back on.

 

 

The operation corresponding to the item number being checked will be carried out.

The item number (A) and the output
status (B) will appear in the main
display (1) in orange. 

 2159M 

2031B  2139M 

   2036B  2097B 

(Item number)

 

(Item name)

* If 2 seconds pass without no operations having been carried out,

the four characters on the left side of the main display will
alternately display the item number and the item name.