Brother S-7200C Manual De Usuario

6. SETTING THE DIP SWITCHES (G50 AND G10 OPERATION PANELS) 

 

S-7200C

 

57

６

 

 

Wait at least 5 minutes after turning off the power switch and disconnecting the power cord from the wall outlet 

before opening the face plate of the control box. Touching areas where high voltages are present can result in 
severe injury.

 

 

1 

Key protect settings 

ON/OFF  Disables operation panel key operations. (*1) 

2 

 

 

Should always be set to OFF. 

3 

 

 

Should always be set to OFF. 

4 

 

 

Should always be set to OFF. (*2) 

 

(*1) The disabled operations will vary depending on the ON/OFF settings. For details, refer to “4-11. Protection settings” 

(P.32) or “5-7. Protection settings” (P.51).   

(*2) If set to ON, operations using the treadle will be disabled, and so always be sure to set to OFF. If you set it to ON and 

turn on the power, error code [E901] will be displayed on the operation panel.