Brother Sewing Machines Manual De Usuario
Appliqué, Patchwork and Quilt Stitching 97
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
3
■ Using the optional quilting guide
Use the quilting guide to sew parallel stitches that
are equally spaced.
are equally spaced.
a
Insert the stem of the quilting guide into the
hole at the rear of the walking foot or presser
foot holder.
hole at the rear of the walking foot or presser
foot holder.
Walking foot
Presser foot holder
b
Adjust the stem of the quilting guide so that
the guide aligns with the seam that has already
been sewn.
the guide aligns with the seam that has already
been sewn.
Note
z The optional quilting guide is available
through your Brother dealer.
Free-motion quilting
With free-motion quilting, lower the feed dogs (using
the drop feed lever) so that the fabric can be moved
freely in any direction.
The optional quilting foot is needed for free-motion
quilting.
the drop feed lever) so that the fabric can be moved
freely in any direction.
The optional quilting foot is needed for free-motion
quilting.
a
Turn off the sewing machine.
b
Remove the presser foot and the presser foot
holder.
holder.
• Refer to “Removing the presser foot holder”
(page 43).
c
Secure the quilting foot with the presser foot
holder screw.
The pin on the quilting foot should be
positioned over the needle clamp screw.
holder screw.
The pin on the quilting foot should be
positioned over the needle clamp screw.
a Pin on quilting foot
b Presser foot holder screw
c Needle clamp screw
b Presser foot holder screw
c Needle clamp screw
d
Hold the quilting foot in place with your right
hand, and then tighten the presser foot holder
screw using the screwdriver in your left hand.
hand, and then tighten the presser foot holder
screw using the screwdriver in your left hand.
a Presser foot holder screw
CAUTION
● Be sure to securely tighten the screws
with the screwdriver, otherwise the
needle may touch the presser foot,
causing it to bend or break.
needle may touch the presser foot,
causing it to bend or break.
c
b
a
a