Janome 9700 Manual De Usuario

15

Raise the Presser Foot Lifter. Press the Up/Down
Needle Button twice to raise the needle to its highest
position.

1 Hold the upper thread with both hands as shown

and place it down into the Slit.

2 Draw the thread around the Thread Guide following

the dashed line as shown in the diagram.

3 Then draw the thread down along the right channel

and around the bottom of the Thread Guide Plate.

1 Right Channel

4 Firmly draw the thread up along the left channel to

the Take-up Lever and down into its eye from the
right to the left.

2 Left Channel

5 Then pull the thread down along the left channel

and through the Lower Thread Guide.

6 Slide the thread behind the Needle Bar Thread

Guide on the left.

7 Thread the needle from front to back by hand or

using the Built-in Needle Threader.

1

2

3

4

5

6

7

4

2

1

6

7

5

3

1

2