ONKYO C-7000R Manual De Usuario

En

• The disc is upside down. Load the disc with the label-

15, 22).

• The disc is dirty. Remove the disc and clean it (

• If condensation appears, unplug the power cord and 

leave the compact disc player more than 3 hours at room 
temperature.

• Make sure the disc is standard. See “Disc Note” (

• CD-R/CD-RW that are not finalized cannot be played.

• Install the compact disc player somewhere free of 

vibration.

• The disc is dirty. Remove the disc and clean it (

• The disc is very scratched. Replace the disc.

• No such track on the disc. Enter another number (

24).

• The disc is dirty. Remove the disc and clean it (

• The disc is very scratched. Replace the disc.

• Turn off any special playback modes (e.g. repeat, 

memory, or random).

• Make sure the audio cable is connected correctly 

(

17).

• Make sure that all audio connecting plugs are pushed in 

all the way (

• Make sure that the connected component’s input jack 

and the input settings are correct.

• Make sure that the connected component’s volume isn’t 

set to the lowest level, and that the volume isn’t muted.

• Make sure the batteries have been installed with the 

correct polarity (+/–) (

10).

• Replace both batteries with new ones. (Do not mix 

different types of batteries or new and old batteries.)

• The remote controller is too far away from the compact 

disc player, or there’s an obstacle between them (

• The compact disc player’s remote control sensor is being 

subjected to bright light (inverter-type fluorescent light 
or sunlight).

• The compact disc player is located behind the glass 

doors of a audio rack or cabinet.