ONKYO CR-N1 Manual De Usuario
31
Basic operation
The remote controller is used to set the clock.
Setting the day & time
1
Press the TIMER button repeatedly until
“ADJUST” appears on the display, and
then press the ENTER button.
“ADJUST” appears on the display, and
then press the ENTER button.
The day of the week flashes on the dis-
play.
play.
2
Use the SETTING ( / ) buttons, or the
numeric keypad to select the day of the
week, and then press the ENTER button
(the time flashes on the display).
numeric keypad to select the day of the
week, and then press the ENTER button
(the time flashes on the display).
Days are selected using the numeric key-
pad as follows:
pad as follows:
1: SUN
2: MON
3: TUE
4: WED
5: THU
6: FRI
7: SAT
Note that the clock must be set to the 24
hour format in order to use the numeric key-
pad to set the day and time.
hour format in order to use the numeric key-
pad to set the day and time.
3
Use the SETTING ( / ) buttons, or the
numeric keypad to set the time, and
then press the ENTER button (the clock is
now set.).
numeric keypad to set the time, and
then press the ENTER button (the clock is
now set.).
The time is entered using the numeric
keypad as follows:
keypad as follows:
To enter 09:38 a.m., press the following
buttons: 10/0, 9, 3, 8, and then ENTER.
buttons: 10/0, 9, 3, 8, and then ENTER.
To enter the time 11:00 a.m., press the fol-
lowing buttons: 1, 1, 10/0, 10/0, and then
ENTER.
lowing buttons: 1, 1, 10/0, 10/0, and then
ENTER.
If you set the clock while the CR-N1 is in
Standby mode, the time is displayed. If
you set it while the CR-N1 is on, the previ-
ously displayed information reappears.
Standby mode, the time is displayed. If
you set it while the CR-N1 is on, the previ-
ously displayed information reappears.
Setting the clock
TIMER
ENTER
SETTING ( / )
SETTING ( / )
Numeric keypad
Remote controller
Remote controller