Sony MDS-E12 Manual De Usuario
47
Editing Recor
ded MDs
6
Turn AMS to select the character.
The selected character flashes.
The selected character flashes.
D
N m I n T r 2 1
To change a selected character
Repeat steps 5 and 6.
Repeat steps 5 and 6.
7
Press AMS.
The selected character is entered and is continuously
displayed. The cursor moves to the next position, and
again flashes.
The selected character is entered and is continuously
displayed. The cursor moves to the next position, and
again flashes.
D
N m I n T r 2 1
8
Repeat steps 5 to 7 to enter the rest of the name.
To change a character
Press m/M repeatedly until the character to be
changed flashes, then repeat steps 5 to 7.
Press m/M repeatedly until the character to be
changed flashes, then repeat steps 5 to 7.
To erase a character
Press m/M repeatedly until the character to be
erased flashes, then press CLEAR.
Press m/M repeatedly until the character to be
erased flashes, then press CLEAR.
9
Press YES.
“Complete!” appears in the display, and the name is
entered.
“Complete!” appears in the display, and the name is
entered.
To cancel the operation
Press MENU/NO or x.
Press MENU/NO or x.
Naming a track or MD using the remote Z
1
Naming a track or disc is done by the following
operations.
operations.
• Naming a track
While the track number is displayed and the recorder
is stopped, playing, paused or recording, press
NAME.
is stopped, playing, paused or recording, press
NAME.
• Naming a disc
When the total number of tracks is displayed and the
recorder is stopped, press NAME.
The cursor flashes, and the characters can be entered.
recorder is stopped, press NAME.
The cursor flashes, and the characters can be entered.
2
Repeatedly press CHAR or NUM to select the
character type
character type
Character type
Display
Uppercase letters or symbols*
“Selected AB”
Lowercase letters or symbols*
“Selected ab”
Numbers or symbols
“Selected 12”
* Symbols which can be used:
_ / , . ( ) ! ?
3
Press letter/number to enter the characters
After you enter a character, the cursor shifts rightward
and waits for the input of the next character.
After you enter a character, the cursor shifts rightward
and waits for the input of the next character.
4
Repeat steps 2 and 3 to enter the rest of the name.
To change a character
Press m/M repeatedly until the character to be
changed flashes, press CLEAR to erase the character,
then repeat steps 2 and 3.
Press m/M repeatedly until the character to be
changed flashes, press CLEAR to erase the character,
then repeat steps 2 and 3.
5
Press YES.
“Complete!” appears in the display, and the name is
entered.
“Complete!” appears in the display, and the name is
entered.
To cancel the operation
Press MENU/NO or x.
Press MENU/NO or x.