Sony MDS-E12 Manual De Usuario
58
Rear Panel T
e
rminal Functions
Electrical specifications
Input terminal
Input system
Make contact
Input on voltage
0.5V or less
Input off voltage
3V or more
Open Terminal voltage
5V
Input pulse width
100msec or more
Input withstand voltage
_0.5 to +10V
Output terminal
Output system
NPN transistor open collector
On residual voltage
0.5V or less
On maximum inflow
100mA
current
Withstand voltage
Withstand voltage
20V
Using Fader Play
By connecting the fader of the mixer to the terminal on the
recorder which is set as the Fader PLAY of the parallel
input, starting play and pause at the beging of the next
track are synchronized to the fader of the mixer.
This can be used in the mixer equipped with fader remote
function in which
By connecting the fader of the mixer to the terminal on the
recorder which is set as the Fader PLAY of the parallel
input, starting play and pause at the beging of the next
track are synchronized to the fader of the mixer.
This can be used in the mixer equipped with fader remote
function in which
_
∞
position (lowest position) is OFF
and the other position are ON.
In the recorder, “AMS+” and “PAUSE” are carried out
when the fader is OFF, and “PLAY” is carried out when the
fader is ON.
In the recorder, “AMS+” and “PAUSE” are carried out
when the fader is OFF, and “PLAY” is carried out when the
fader is ON.
Notes on Fader PLAY
• Operation on the final track number
When you want to continue to use Fader PLAY from the
last track number, select the beginning of the track to use
recorder manually. AMS+ cannot be used for the last track
number. because it is aware that there is no next track
number, SO for the final track number, momentarily turn
the fader to the OFF position.
• Operation on the final track number
When you want to continue to use Fader PLAY from the
last track number, select the beginning of the track to use
recorder manually. AMS+ cannot be used for the last track
number. because it is aware that there is no next track
number, SO for the final track number, momentarily turn
the fader to the OFF position.
• To repeat one track
To repeat only one track with Fader PLAY, select the
desired track with PROGRAM Mode, and set the REPEAT
Mode to “REPEAT ALL”. In normal operation, the one-
track repeat setting is operated by AMS+, which is the
operating standard for making the next track one-track
repeat. If the fader is set to OFF, the operation is done by
AMS+ and the beginning of the next track will cause the
settings to revert to initial settings for the first track, and
repeat play will not be made.
To repeat only one track with Fader PLAY, select the
desired track with PROGRAM Mode, and set the REPEAT
Mode to “REPEAT ALL”. In normal operation, the one-
track repeat setting is operated by AMS+, which is the
operating standard for making the next track one-track
repeat. If the fader is set to OFF, the operation is done by
AMS+ and the beginning of the next track will cause the
settings to revert to initial settings for the first track, and
repeat play will not be made.
RS-232C
—D-sub 9-pin (male)
The recorder can be controlled externally through the use
of other devices connected through this terminal. For
protocols, please consult your dealer.
of other devices connected through this terminal. For
protocols, please consult your dealer.