Audio-Technica BP892 Prospecto

BP892 & BP892-TH

Specifications

LEGEND

200 Hz

1 kHz

5 kHz

8 kHz

SCALE IS 5 DECIBELS PER DIVISION

240˚

180˚

210˚

270˚

300˚

330˚

0˚

150˚

120˚

90˚

30˚

60˚

12" or more on axis

LEGEND

Frequency in Hertz

Response in dB

10 dB

100

200

10k

500

20k

Roll-off

LEGEND

200 Hz

1 kHz

5 kHz

8 kHz

SCALE IS 5 DECIBELS PER DIVISION

240˚

180˚

210˚

270˚

300˚

330˚

0˚

150˚

120˚

90˚

30˚

60˚

12" or more on axis

LEGEND

Frequency in Hertz

Response in dB

10 dB

100

200

10k

500

20k

Roll-off

frequency response: 20–20,000 Hz

polar pattern

Fixed-charge back plate, permanently

polarized condenser

Omnidirectional

20-20,000 Hz

80 Hz, 18 dB/octave (wired only)

–49 dB (3.5 mV) re 1V at 1 Pa

250 ohms (wired only)

135 dB SPL, 1 kHz at 3% T.H.D.

104 dB, 1 kHz at Max SPL (wired only)

63 dB, 1 kHz at 1 Pa

11-52V DC, 2 mA typical (wired only)

0.1 mA typical at 5V (wireless only)

2.5-11V (wireless only)

Flat, roll-off (wired only)

Microphone, boom & earpiece:

2.6 g (0.09 oz)

Power module (wired only): 85 g (3.0 oz)

Microphone: 8.1 mm (0.32") long,

2.6 mm (0.10") diameter

Boom: 98.4 mm (3.87") long,

1.07 mm (0.04") diameter

Power module (wired only): 97.6 mm

(3.84") long, 18.9 mm (0.74") diameter

Integral 3-pin XLRM-type

1.4 m (55") long (permanently attached

to microphone), 1.6 mm (0.06") diameter,

2-conductor shielded cable with locking

4-pin connector (wired only)

M31

AT8539 power module (wired only);

AT8440 cable clip; AT8464 dual-ear

mount; two AT8157 windscreens; two

AT8156 element covers; moisture guard;

belt clip (wired only); carrying case

Element

Polar pattern

Frequency response

Low frequency roll-off

Open circuit sensitivity

Impedance

Maximum input sound level

Dynamic range (typical)

Signal-to-noise ratio

Phantom power requirements

Current consumption

Voltage range

Switch

Weight

Dimensions

Output connector (power module)

Cable

Audio-Technica case style

Accessories furnished

BP892

In the interest of standards development, A.T.U.S.

offers full details on its test methods to other industry

professionals on request.

1 Pascal = 10 dynes/cm

= 10 microbars = 94 dB SPL

Typical, A-weighted, using Audio Precision System One.

Specifications are subject to change without notice.

The donut-shaped moisture guard is provided to protect the element from

sweat and moisture. Position the moisture guard as close to the element as

possible to provide maximum protection. To remove the moisture guard, first

remove the element cover and place it out of harm’s way. Gently slide the

moisture guard over the element. Replace the element cover.

Avoid leaving the microphone in the open sun or in areas where

temperatures exceed 110° F (43° C) for extended periods. Extremely high

humidity should also be avoided.

Architect’s and Engineer’s Specifications

The microphone shall be a fixed-charge condenser designed for headworn

use. It shall have an omnidirectional polar pattern and a frequency response

of 20 Hz to 20,000 Hz. The microphone shall operate from an external 11V

to 52V DC phantom power source. It shall be capable of handling sound

input levels up to 135 dB with a dynamic range of 104 dB. Nominal open-
circuit output voltage shall be 3.5 mV at 1V, 1 Pascal. Output shall be low
impedance balanced (250 ohms). The microphone shall be RoHS compliant.

The microphone shall have a 1.4 m (55") permanently attached miniature
cable terminating in a locking 4-pin output connector. The output connector
shall connect to a jack on the included power module. The output connector
shall also connect to any Audio-Technica UniPak

body-pack wireless

transmitter. The power module shall contain a recessed switch to permit
choice of flat response or 80 Hz low-frequency roll-off. The output of the
power module shall be a 3-pin XLRM-type connector.

The microphone shall be an underear headworn design with a diameter of 2.6
mm (0.10"). Microphone, boom and earpiece weight shall be 2.6 grams (0.09
oz). The microphone shall include a power module, a cable clip, a dual-ear
mount, two windscreens, two element covers, a moisture guard, a belt clip
and a carrying case. Finish shall be low-reflectance black [beige].

Wireless models of the microphone shall also be available, terminated for
use with Audio-Technica UniPak

body-pack transmitters and a variety of

other manufacturers’ wireless systems. The wireless models’ dimensions,
polar pattern and included accessories (excluding power module and belt
clip) shall be identical to those of the wired model. The microphone shall
also be available unterminated.

The Audio-Technica BP892 [BP892-TH] is specified.

The Audio-Technica BP892cW [BP892cW-TH]; BP892cL4 [BP892cL4-TH];
BP892cLM3 [BP892cLM3-TH]; BP892cT4 [BP892cT4-TH]; BP892cT5
[BP892cT5-TH] (wireless version) is specified.

The Audio-Technica BP892c [BP892c-TH] (unterminated) is specified.

Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224

Audio-Technica Limited, Old Lane, Leeds LS11 8AG England

0001-0162-01

Function

Wire Color

Pin 1

Ground/Shield Green

Pin 2

Instrument

Jumper to Pin 1

Pin 3

Mic Audio

Copper Color

Pin 4

Bias + In

Red

Function

Wire Color

Pin 1

Ground/Shield Green

Pin 2

Bias + In

Red

Pin 3

Mic Audio

Copper Color

Pin 4

Source Load

Jumper to Pin 3

Function

Wire Color

Pin 1

Ground/Shield Green

Pin 2

Bias + In

Red

Pin 3

Mic Audio

Copper Color

Pin 4

Source Load

Jumper to Pin 1

Pin 5

Line In

Open

Function

Wire Color

Pin 1

N/C

Open

Pin 2

N/C

Open

Pin 3

Bias + In,

Red

Mic Audio

Shell/Case Ground/Shield Green

Function

Wire Color

Sleeve Ground/Shield Green
Ring

Mic Audio

Copper Color

Tip

Bias + In

Red

BP892, cW, cW-TH

cT4, cT4-TH

cT5, cT5-TH

cL4, cL4-TH

cLM3, cLM3-TH