Sony mds-e52 Manual De Usuario
25
Editing Recorded MDs
Actual total number:
Sony Sound Tec MDS-E52(E) 2-346-702-12(1)
7
Repeat Steps 4 to 6 until you have entered the
entire title.
entire title.
If you entered the wrong character
Press
0 or ) until the character to be corrected starts
flashing, and repeat Steps 4 to 6 to enter the correct
character.
character.
To erase a character
Press
0 or ) until the character to be erased starts
flashing, then press EDIT/NO.
To enter a space
Press AMS or
) while the cursor is flashing.
8
Press YES.
This completes the labeling procedure and the
title appears on the left side of the display.
This completes the labeling procedure and the
title appears on the left side of the display.
To cancel labeling
Press
p.
Note
You cannot label a track or an MD while you are recording
over an existing track.
over an existing track.
4
Press DISPLAY/CHAR to select the character
type as follows:
type as follows:
5
Turn AMS to select the character.
The selected character flashes.
Letters, numbers, and symbols appear in
sequential order as you turn AMS.
You can use the following symbols in titles:
! ” # $ % & ’ ( ) * + , – . / : ; < = > ? @ _ `
Letters, numbers, and symbols appear in
sequential order as you turn AMS.
You can use the following symbols in titles:
! ” # $ % & ’ ( ) * + , – . / : ; < = > ? @ _ `
You can press DISPLAY/CHAR to change the
character type at any time during this step (see
Step 4.)
character type at any time during this step (see
Step 4.)
6
Press AMS to enter the selected character.
The cursor shifts rightward and waits for the
input of the next character.
The cursor shifts rightward and waits for the
input of the next character.
To select
Press DISPLAY/CHAR repeatedly
until
until
Uppercase letters
“A” appears in the display
Lowercase letters
“a” appears in the display
Numbers
“0” appears in the display
(Continued)
>
1/22-27_MDS-E52.12E
99.1.29, 10:21 AM
25