Alpine IVA-D300 Manual De Usuario

-EN

Installing the Tuner Box

Caution
Do not block the unit’s fan or heat sink, thus
preventing air circulation. If blocked, heat will
accumulate inside the unit and may cause a fire.

When mounting with Velcro fasteners

When mounting the tuner with the Velcro fasteners, be sure to choose
a flat location.
Do not hang the unit from the bottom of the dashboard or rear deck
with the Velcro fasteners.

Remove the Protective paper and attach two pieces
of Velcro fastener to the bottom of the Tuner.

Check the position, and then fix the Tuner to the
floor carpet.

When mounting with Screws

When mounting the tuner with the screws, be sure to choose a flat
location.
When making holes, be careful not to scratch any pipes or wires.

Connect the bracket to both the flanks of the tuner
with the supplied pan screws (M4

× 8).

Install the tuner on the floor with the supplied
flange-head tapping screws (M4

× 14).

Installing the DC/DC Converter

Install the DC/DC Converter on the floor with the
supplied flange-head tapping screws (M4

× 14).

Air ventilation hole

<Side of the tuner box>

Tuner Box

Bracket (Included)

Pan screws (M4

× 8) (Included)

Flange-head tapping screws
(M4

× 14) (Included)

Tuner Box

Flange-head tapping
screws (M4

× 14)

(Included)

DC/DC Converter

Tuner Box

Velcro Fasteners
(Included)

Protective paper