Graco 332317C Manual De Usuario
Plus Model Control Setup
332317C
21
Plus Model Control Setup
Control Panel Overview (F
NOTE: Programming instructions begin on page 22.
F
IG
. 13
ON
OFF
MM
HH
Lubrication Pump
ON TIME
•
The blinking LED below ON
indicates the ON Time
sequence is running.
indicates the ON Time
sequence is running.
•
Display shows time as MM
(minutes).
i.e., 02 is 2 minutes.
(minutes).
i.e., 02 is 2 minutes.
•
Times lubrication cycle.
•
Counts down from a set time to
zero.
zero.
OFF TIME
•
The blinking LED below OFF indicates the
OFF Time sequence is running.
OFF Time sequence is running.
•
Value is entered in HH.
•
Displays in HH.
•
Times pump rest between cycles.
•
Counts down from a set time to zero.
LOW LEVEL FAULT
LED next to icon lights when
pump is out of lubricant. Pump
run cycle stops.
pump is out of lubricant. Pump
run cycle stops.
LOCK ICON
•
LED next to icon lights indi-
cating PIN is required to
enter setup.
cating PIN is required to
enter setup.
•
In SETUP MODE LED
lights when setting up the
PIN.
lights when setting up the
PIN.
LEFT DIRECTION ARROW /
RESET
RESET
•
In SETUP MODE, moves cur-
sor in display one field to the
left.
sor in display one field to the
left.
•
In Low Level Fault Mode: press-
ing and holding for 3 seconds
clears fault and switches cycle
to OFF MODE.
ing and holding for 3 seconds
clears fault and switches cycle
to OFF MODE.
RIGHT DIRECTION ARROW /
MANUAL RUN / ENTER:
MANUAL RUN / ENTER:
•
In SETUP MODE, saves
entry, moves cursor in display
one field to the right or to the
next setup step.
entry, moves cursor in display
one field to the right or to the
next setup step.
•
In RUN MODE starts a man-
ual run cycle.
ual run cycle.
UP and DOWN ARROW
•
Hold both the UP and DOWN ARROW but-
tons down together for 3 seconds to enter
SETUP MODE.
tons down together for 3 seconds to enter
SETUP MODE.
•
In SETUP MODE, increases or decreases
number values shown in display.
number values shown in display.