Harbor Freight Tools 66514 Manual De Usuario

SKU 66514

for technical questions, please call 1-800-444-3353.

Page 3

unpacking

When unpacking, check to make sure

that the item is intact and undamaged. If

any parts are missing or broken, please

call Harbor Freight Tools at the number

shown on the cover of this manual as soon

as possible.

inStallation

read the entire important

Safety inStructionS

section at the beginning of this

manual including all text under

subheadings therein before set

up or use of this product.

to preVent

SeriouS injury

from accidental

operation:

unplug the fountain pump

from its electrical outlet

before assembling,

inspecting, making any

adjustments, or servicing.

note: For additional information regarding

the parts listed in the following pages,

refer to the Assembly Diagram near

the end of this manual.

figure 1

Spray Nozzle (9)

Output Tube (7)

Tee Fitting System

(10)

Coupling

Nut (5)

Main Housing (4)

1. Thread the Coupling Nut (5) to the

Main Housing (4).
Thread the Tee Fitting System (10) to

the top of the Coupling Nut (5).

note: there are two on/off Switches

on the tee fitting System (10).

turning either Switch 90° changes

it from off to on, or on to off.

(Stamped onto the fountain pump

parts are pluS/minuS symbols

showing either open, or closed.)

See figure 2.

figure 2

3. Thread the Output Tube (7) to the top

of the Tee Fitting System (10).
Thread the Bell Nozzle (8), the Bub-

bling Nozzle (6), or the Spray Nozzle