Harbor Freight Tools 69297 Manual De Usuario
Page 3
For technical questions, please call 1-800-444-3353.
SKU 69297
Grounding instructions
to pRevent electRic Shock and death FRom incoRRect GRoundinG WiRe connection
Read and FolloW theSe inStRuctionS:
Check with a qualified electrician if you
are in doubt as to whether the outlet is
properly grounded. Do not modify the
power cord plug provided with the tool.
Never remove the grounding prong from the plug. Do
not use the tool if the power cord or plug is damaged.
If damaged, have it repaired by a service facility
before use. If the plug will not fit the outlet, have a
proper outlet installed by a qualified electrician.
1.
125 v~ 3-prong plug and outlet
(for up to 125 v~ and up to 15 a)
Grounding
pin
Tools marked with “Grounding Required” have a three
wire cord and three prong grounding plug. The plug
must be connected to a properly grounded outlet.
If the tool should electrically malfunction or break
down, grounding provides a low resistance path to
carry electricity away from the user, reducing the risk
of electric shock.
(See 3-prong plug and outlet.)
2. The grounding prong in the plug is connected through
the green wire inside the cord to the grounding
system in the tool. The green wire in the cord must
be the only wire connected to the tool’s grounding
system and must never be attached to an electrically
“live” terminal.
(See 3-prong plug and outlet.)
3. The tool must be plugged into an appropriate outlet,
properly installed and grounded in accordance with
all codes and ordinances. The plug and outlet should
look like those in the preceding illustration.
(See 3-prong plug and outlet.)
4. This pump is intended for use on a circuit that has
an outlet that looks like the one illustrated above in
125 v~ 3-prong plug and outlet. The pump has
a grounding plug that looks like the plug illustrated
above in
125 v~ 3-prong plug and outlet.
5. The outlet must be properly installed and grounded
in accordance with all codes and ordinances.
6. Do not use extension cords with this pump.
7. Do not use an adapter to connect
this pump to a different outlet.
Symbology
Double Insulated
Canadian Standards Association
Underwriters Laboratories, Inc.
v~
Volts Alternating Current
a
Amperes
n0 xxxx/min.
No Load Revolutions per Minute (RPM)
WARNING marking concerning Risk
of Eye Injury. Wear ANSI-approved
safety goggles with side shields.
Read the manual before
set-up and/or use.
WARNING marking
WARNING marking
concerning Risk of Fire.
Do not cover ventilation ducts.
Keep flammable objects away.
WARNING marking concerning
Risk of Electric Shock.
Properly connect power cord
to appropriate outlet.
WARNING marking concerning
Risk of Explosion.
Do not use to pump
explosive materials.