Harbor Freight Tools 98342 Manual De Usuario

SKU 98342 

Page 3

When unpacking, check to make sure 

that the item is intact and undamaged.  If 

any parts are missing or broken, please 

call Harbor Freight Tools at the number 

shown on the cover of this manual as soon 

as possible.

The submersible motor pump must 

be installed in a stationary position with 

either:

A fixed pipeline or

a. 

A flexible hose pipe.

b. 

Do not install the pump by suspend-

1. 

ing it unsupported from its delivery 

pipe or power cord.  The pump must 

be suspended from the handle or be 

placed on the bottom of the shaft.  To 

ensure that the pump works properly, 

keep the bottom of the shaft free from 

sludge and dirt of all kinds.
If the water level sinks too low, any 

2. 

sludge in the shaft will dry out and 

stop the pump from starting.  To help 

ensure the pump will start as re-

quired, check the pump regularly with 

start-up tests.
The pump must be installed with an 

3. 

automatic float switch (not included) 

to prevent running dry.

The pump is equipped with a shock-

1. 

proof plug according to regulations.  

The pump is designed to be connect-

ed to 115 V~, 60 Hz safety socket.

Make sure that the socket is suf-

2. 

ficiently secured and is in excellent 

condition.
When the plug is inserted into the 

3. 

socket the pump will be on standby.

WARnIng!  If the power cord or plug is 

damaged, do not use the pump.  The 

power cord or plug may only be re-

paired by a certified electrician.

This pump is designed for use as a 

1. 

basement pump.  When installed in a 

shaft, this pump provides some pro-

tection from basement flooding.
This pump can also be used to trans-

2. 

fer water (e.g. household, farming, 

plumbing).

After reading these instructions, con-

sider the following points before starting 

the pump:

Verify that the pump rests on the floor 

1. 

of the shaft, if it is not suspended by 

the handle.
Verify that the delivery pipe is prop-

2. 

erly connected.
Verify that the electrical connection is 

3. 

115 V~, 60 Hz.
Verify that the electrical socket is in 

4. 

good condition.
Verify that water and moisture cannot 

5. 

get near the power supply socket.
Verify that the pump is installed so as 

6. 

to prevent running dry.