Blaupunkt CM 168 Manual De Usuario

Press the button indicating the oppo-
site direction,

or / to stop tape

winding.

Changer mode (optional)

Select CD

Up
Down

Select track

Up: press briefly
CUE - fast forward (audible):
hold button down.

Down: press two or more
times briefly
Repeat track: press once
briefly.
REVIEW - fast reverse
(audible) - hold button
down.

Additional rocker switch functions:
For additional settings use
AUD

;

DSC-MODE

Important: The corresponding func-
tion must be active.

SRC (Source)

Press button briefly to select the oper-
ating mode (tuner, cassette, changer
or Aux-in). The active mode will ap-
pear in the display.

;

AUD
Treble and bass adjustment
You can store different settings for the
FM, AM, cassette, CD-changer mode
or Aux-in.
Setting the tone:
•

Select the operating mode.

Press AUD once and use the rocker
switch to set the tone.

Treble +
Treble -

Bass -

Bass +

For Fader and balance adjustment:
press AUD twice.

Fader front
Fader rear

Balance left

Balance right

The selected values will appear in the
display. The last setting is stored au-
tomatically.

Switching AUD off: Press the button
again briefly.
If you do not make any adjustments to
the tone within 8 seconds, the AUD
mode will quit automatically.

LD: Loudness
Loudness boosts the bass frequency
at low volume.
Loudness on/off: Press LD briefly.
“LD” will appear when this setting is
active.
Refer to the section on DSC program-
ming to adjust Loudness to different
levels.

DIS - Clock display

This unit is equipped with an internal
clock.

Display priority
To alter the display priority, press
until you hear a beep. Repeat this pro-
cedure until the desired display ap-
pears.

Temporary display change
Press

briefly as many times as

needed to show the desired informa-
tion for a few seconds.

Radio mode
Press this button to switch between
the clock, the station name and the
frequency.