Hans Grohe 06126XX0 Manual De Usuario

3

Remove the old showerhead:

While holding the shower arm, remove the exist-

ing showerhead by turning counter-clockwise with a 

wrench.

Clean the threads on the shower arm with a wire 

brush.

Install the new showerhead:

Slide the boot onto the shower arm.  Push it out of the 

way.

Screw the showerhead onto the arm by hand.  Finish 

tightening with a wrench, if desired. 

Turn on the water and check for leaks.

Pull the boot down over the joint.

Note: Retroaktiv 06397XX0 does not include a boot.

Place the screen washer in the end of the handshower 

hose (not included).  Screw the hose to the hand-

shower.