Moen 67315 Prospecto
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Integra®
Single Control Kitchen Faucet
Models: 67315 series
NOTE: DESIGNED TO INSTALL
THRU 1 OR 3 HOLES 1-1/2” (38mm) DIA.
DESCRIPTION
•
Metal construction with various finishes identified by suffix
•
Pullout spray with 68" braided hose)
•
Flexible supplies with 3/8” compression fittings
OPERATION
•
Lever style handle
•
Temperature controlled by 100˚ arc of handle travel
•
Spout rotation is 120˚
•
Operates with less than 5lbs. of force
•
Operates in stream or spray mode in the pullout or retracted position
FLOW
•
Flow is limited to 1.5 gpm (5.7 L/min) at 60 psi
CARTRIDGE
•
1255™ Duralast™ cartridge
STANDARDS
•
•
Third party certified to IAPMO Green, CSA B125.1,
ASME A112.18.1/CSA B-125.1
and all applicable requirements referenced therein including NSF 61/9
•
Meets CalGreen and Georgia SB370 requirements
•
Contains no more than 0.25% weighted average lead content
•
Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
Drinking Water Act
•
The backflow protection system in the device consists of two independently
operating check valves, a primary and a secondary which prevent backflow
operating check valves, a primary and a secondary which prevent backflow
•
ADA
for lever handle
WARRANTY
•
Lifetime limited warranty against leaks, drips and finish defects to
the original consumer purchaser
the original consumer purchaser
•
5 year warranty if used in commercial installations
28-1/2"
(724mm)
10-5/8”
(270mm)
5-9/16”
(141mm)
2-1/2”
(63.5mm)
Max. Deck
Thickness
7-5/8”
(194mm)
9-5/8”
(241mm)
Rev. 9/11
There is more than 1 version of this model.
Page down to identify the version you have.
Page down to identify the version you have.