Clarion BD216 Manual De Usuario

BD216

E
glis

Setting the Z-enhancer

This unit comes with three types of sound tone
effects stored in memory. Select the one you prefer.

The factory default setting is “Z-EHCR OFF”.

Each time you press Z-EHCR button

, the

tone effect changes in the following order.
“Z-ENHANCER 1”

➜

“Z-ENHANCER 2”

➜

“Z-ENHANCER 3”

➜

“Z-EHCR OFF”

➜

“Z-ENHANCER 1”...
• Z-ENHANCER 1: bass emphasized
• Z-ENHANCER 2: treble emphasized
• Z-ENHANCER 3: bass and treble emphasized
• Z-EHCR OFF: no sound effect

Switching the Clock Display

Press and hold the BND button

, and then

press the DISP button

to swith between the

operation mode and the clock display.

Setting the Clock

1) Press and hold the BND button

, and then

press the DISP button

to display the clock

display.

2) Press and hold the BND button

, and then

press the DISP button

for 2 seconds or

longer.

3) Press the SRCH Up button

, then set the

current hour.

4) Press the SRCH Down button

, then set

the current minute.

5) Press the BND button

, then the clock is

set.

Notes:

•

If you select another operation mode while you are
setting the clock, the clock setting operation will be
canceled.

•

If you remove the vehicle’s battery for a check or
repair, the clock will be reset, so you must set it again.

Radio Mode Operations

FM Reception

For enhanced FM performance the

tuner includes signal actuated stereo control and
Multipath noise reduction circuits.

Listening to the Radio

1) Press the FNC button

to select the radio

mode, then the radio will be on.

2) To select a preset band, press the BND but-

ton

, then select one of the preset bands

such as FM1, FM2, FM3, FM4, or AM. Every
time the BND button

is pressed, the dis-

play will change as:

3) Press the SRCH Up/Down button

, then

the station at which there is a broadcast will
be selected (Seek selection).

Manual Tuning

1) Press the BND button

, then select FM1,

FM2, FM3, FM4 or AM.

2) Press and hold the BND button

for 2 sec-

onds or longer, then the display will show
“MANU”, which means that a manual selec-
tion function is on.

3) Press the SRCH Up/Down button

and

select the right station.

Seek Tuning

1) Press the BND button

, then select FM1,

FM2, FM3, FM4 or AM.

2) If the “MANU” on the display is on, press and

hold the BND button

for 2 seconds or

longer. When the “MANU” display is off, the
Seek Selection function is on.

3) Press the SRCH Up/Down button

, then

when it selects the station in which there is a
broadcast, it automatically stops.

FM1

FM2

FM3

FM4