Axor 38000XX1 Manual De Usuario

2

Maximum incoming water pressure

147 PSI

Recommended incoming water pressure

14.7 - 72.5 PSI

Recommended incoming hot water temperature

120

o

 - 140

o

 F*

Hole size in mounting surface

1-1/4” min

1-5/8” max

Maximum mounting surface depth

1- 5/8”

Flow Rate

2.2 GPM

*Some governing bodies require that the water heater be set to 120o F or less.  Please know and follow all

applicable local codes when setting the temperature on the water heater.

The faucet is turned on or off by moving the handle forward or to the rear, respectively.

Rotating the handle to the left delivers hot water, and to the right cold water.

If the flow rate diminishes over time, remove and clean the aerator.

FOR BEST RESULTS, HANSGROHE RECOMMENDS THAT THIS UNIT BE INSTALLED BY A LICENSED,

PROFESSIONAL PLUMBER.

Please read over these instructions thoroughly before beginning installation.  Make sure that you have all tools

and supplies needed to complete the installation.

The supply hoses provided on this faucet are made to fit supply stops with 3/8” compression fittings.

The high temperature limit stop can be re-set to comply with local plumbing codes, or to protect children from

scalding.