Kenwood CT/KXF-W Manual De Usuario
9
CT-2050/203/KXF-W6010/W4010 (En/M)
Controls and indicators
1 Deck A
This deck is used exclusively for play-
back. (CT-203/KXF-W4010 only)
This deck is capable of both playback
and recording. (CT-2050/KXF-W6010
only)
back. (CT-203/KXF-W4010 only)
This deck is capable of both playback
and recording. (CT-2050/KXF-W6010
only)
2 Deck A eject (0) key
0
Press to open the cassette holder of
deck A.
deck A.
3 Deck B eject (0) key
0
Press to open the cassette holder of
deck B.
deck B.
4 Deck B
This deck is capable of both playback
and recording.
and recording.
5 Deck A operation keys 0~!
1 : Rewind key (for fast winding of
tape toward the left reel seen
from you)
from you)
¡ : Fast Forward key (for fast wind-
ing of tape toward the right reel
seen from you)
seen from you)
2, 3 : Play keys
7
: Stop key (Stop)
6 POWER switch
0
Press to turn this unit ON and OFF.
7 PHONES jack
!
Connect stereo headphones (optional)
here.
here.
8 TIMER switch
£
This switch is used in setting of timer
playback and timer recording.
playback and timer recording.
9 MODE key
^
Press to change the recording
level,balance,or bias settings.
level,balance,or bias settings.
0 Deck B operation keys 0~!
2, 3 : Play keys
7
: Stop key (Stop)
1 : Rewind key (for fast winding of
tape toward the left reel seen
from you)
from you)
¡ : Fast Forward key (for fast wind-
ing of tape toward the right reel
seen from you)
seen from you)
PAUSE (
8
) key
!
:Press to let tape transport pause
temporarily.
temporarily.
REC/ARM (
¶
) key
^
:Press in stop mode to start re-
cording or press in record mode
to let the recording pause after
leaving a non-recorded blank of
4 seconds.
cording or press in record mode
to let the recording pause after
leaving a non-recorded blank of
4 seconds.
! Deck A PAUSE (
8
) key (CT-2050/
KXF-W6010 only)
!
Press to let tape transport pause tem-
porarily.
porarily.
@ Deck A REC/ARM (
¶
) key (CT-2050/
KXF-W6010 only)
^
Press in stop mode to start recording or
press in record mode to let the record-
ing pause after leaving a non-recorded
blank of 4 seconds.
press in record mode to let the record-
ing pause after leaving a non-recorded
blank of 4 seconds.
# RESET A key
!
Press to reset the tape counter of deck
A to “0000”.
A to “0000”.
$ DOLBY NR key
0
Press to switch the Dolby Noise Reduc-
tion mode to B
tion mode to B
= C = OFF. This makes
it possible to use the Dolby NR effect in
recording and playback.
recording and playback.
% REV. MODE key
0
Press to change the tape transport di-
rection.
rection.
^ RELAY REC key (CT-2050/KXF-W6010
only)
(
Press to perform continuous recording
from deck A to deck B.
from deck A to deck B.
& DUBB. keys (NORM./HIGH) (CT-2050/
KXF-W6010 only)
)
DUBBING keys (NORMAL/HIGH) (CT-
203/KXF-W4010 only)
203/KXF-W4010 only)
)
Press to start tape dubbing.
NORM./NORMAL
NORM./NORMAL
: Dubbing at the normal
speed.
HIGH
: Dubbing at a high speed.
* MPX FILTER key
&
Press to reduce beat noise when record-
ing FM broadcasts.
ing FM broadcasts.
( CCRS key
™
Press to start recording after automatic
setting of the optimum CD recording
level and optimum tape recording bias.
setting of the optimum CD recording
level and optimum tape recording bias.
) AUTO BIAS key
^
When this key is pressed, the bias level
appropriate for the tape is set automati-
cally for recording.
appropriate for the tape is set automati-
cally for recording.
¡ RESET B key
Press to reset the tape counter of deck
B to “0000”.
B to “0000”.
™ REC LEVEL/BAL./BIAS knob (CT-
2050/KXF-W6010 only)
^
Adjust this before recording.
£ REC LEVEL/BAL. knob (CT-203/KXF-
W4010 only)
^
Adjust this before recording.