Kärcher 600 LP Manual De Usuario

5

Version 06/05

• Check if the pumps of the metering station, 

sand and activated carbon filter are connected 
to the respective power outlets (18 / 19) at the 
switch box (8).

• Check if the operating mode switch (9) is in the 

correct position “Automatic” or “Hand”.

• Switch the main switch (20) to the “I” position; 

the system starts the drinking water produc-
tion.

Display of the controls (3 / 4) of the sand and acti-
vated carbon filters:

• Display of the time

• LED line: Display of the weekday 

Control of the RO system:

The following is alternately indicated on the 
two-line display of the control panel (10) of the RO 
system:

• Equipment/model No. and operating condition,

• Drinking water temperature and drinking water 

conductance value,

• Operating hours (_ _ _ _ _h _ _min).

If the metering container was com-
pletely empty, the metering pump (29) 
may have possibly drawn in air. In this 
case, bleed the air from the pump as 
described in Section 3.2.3.

In the “Automatic” operating mode, the 
system is controlled via an external float 
switch in the drinking water tank.

In the “Hand” operating mode, the sys-
tem is switched on and off manually via 
the main switch.