Eureka 2940-2969 Series Manual De Usuario
4
HOW TO USE
Helpful Information:
Listen to your cleaner. If you notice a change in the sound
of the motor or a change in performance, it could simply
indicate a common usage or maintenance issue. Such
as, a need to raise or lower the carpet height adjustment,
possible blockage in hose or brush roll area, or a broken
or loose brush roll belt. These are all easy to fix and the
instructions are included in this owner’s guide. Becoming
familiar with the information in this guide will help you to
get the best possible performance from your new cleaner
for many years to come.
ON/OFF Switch.
International symbol
I
means On, International
symbol
symbol
O means Off.
Handle Release.
Step
on handle release to pull
handle back to a comfortable
operating position. To lower
handle completely to the
floor, depress handle release
a second time.
handle back to a comfortable
operating position. To lower
handle completely to the
floor, depress handle release
a second time.
Cleaner Height Setting
. An adjustment that raises or
lowers the cleaner base to match the type of floor surface.
With the cleaner cord unplugged, set the adjustment to
lowest setting for maximum carpet cleaning.
With the cleaner cord unplugged, set the adjustment to
lowest setting for maximum carpet cleaning.
If the cleaner is
difficult to push, move adjustment to next highest setting
until cleaner is comfortable to push. The brush roll must
reach the carpet for effective cleaning. For ease in moving
the adjustment knob, place handle in operating position and
tilt cleaner back to remove weight from front wheels.
until cleaner is comfortable to push. The brush roll must
reach the carpet for effective cleaning. For ease in moving
the adjustment knob, place handle in operating position and
tilt cleaner back to remove weight from front wheels.
Helpful Information:
Before cleaning under
low furniture, check area
first for objects that might
harm the unit or block the
vacuum hose.
WARNING: Avoid injury. Keep loose clothing,
hair, fingers, and all other parts
of body away from any moving
part (such as the revolving brush).
Turn off the switch and unplug the
cleaner before changing the cleaner
height setting.
of body away from any moving
part (such as the revolving brush).
Turn off the switch and unplug the
cleaner before changing the cleaner
height setting.
NOTE: While using accessories, do not place
cleaner on furniture or steps as the
brush roll may cause damage. Place
cleaner on floor with the handle in
storage position.
brush roll may cause damage. Place
cleaner on floor with the handle in
storage position.
1. To use accessories remove hose from hose retainer in
hood of cleaner by lifting up and twisting.
2. Place desired accessory onto end of hose or wand.
•
Turn ridge end to center.
•
Push wands together.
•
Grasp both wands near ridges.
Dusting/Upholstery Brush
is for furniture, blinds,
books, lamp shades, shelves, curtains, draperies, cushions
and fabrics.
Crevice Wand
cleans corners, stairs, baseboards, and
between cushions.
Nested extension wands
to add reach.
•
Pull apart.
Dusting/
Upholstery
Brush
Crevice
Wand
The instructions in the booklet serve as a guide to routine
maintenance. To avoid unnecessary service calls, check the
top and bottom filters, belt and brush roll often.
maintenance. To avoid unnecessary service calls, check the
top and bottom filters, belt and brush roll often.