Yamaha RX-V3800 Manual De Usuario

■

Use this feature to change the name of the inputs in the 
GUI screen or the front panel display menu. (DVD is used 
as the source component in the following example.)

4l 

h

4

ENTER

4k

n

4l 

h

• You can use up to 9 characters for each input.
• Press 4n to change the character in the following 

order, or press 4k to go in the reverse order:
CAPITAL A to Z, space
SMALL 

a to z, space

FIGURE

0 to 9, space

MARK

!, #, %, &, etc.

• Press 4

 to switch between character 

types.

• Repeat steps 1 to 3 to rename each input.

Even if you select “Français”, “Deutsch”, “Español” or 
“

Русский” in “Language” (see page 99), you cannot use 

accent symbols or cyrillic alphabets for the name of each 
input.

4

l 

h

4

ENTER

y
You can also change the name of the input source that appears in 
the display window (B) on the remote control. Refer to 
“Changing source names in the display window” on page 110.

You can only change the name of the current input source (except 
for multi channel input sources) using this setting.

■

Use this feature to set the direction of the signals input 
into the center, subwoofer and surround channels when a 
source component is connected to the MULTI CH INPUT 
jacks.

Use this setting to select the number of channels input 
from an external decoder (see page 29).

If “Zone2 Amplifier” (page 97) is set to “INT:[SP1]”, 
“INT:[SP2]” or “INT:Both”, no sound is output from the surround 
back speakers even if you select “8ch”. In this case, select “6ch” 
and set the output setting of the external component to 6 channels.

If you selected “8ch” in “Input Channels”, you can select 
analog jacks at which front left and right channel signals 
from an external decoder will be input.
Choices: CD, CD-R, MD/TAPE, BD/HD DVD, 

, 

DTV/CBL, DVR, VCR, V-AUX 

■

Use this feature to select the video source played in the 
background of the sources input at the MULTI CH INPUT 
jacks.

Select “6ch” the connected component outputs 
discrete 6-channel audio signals.

8ch

Select “8ch” the connected component outputs 
discrete 8-channel audio signals. Also set “Front 
Input” (see below) to the analog audio jacks at 
which the front left and right channel signals 
output from the connected component are input.

Automatically selects the last selected video 
source as the background video source.

BD/HD DVD, 
DTV/CBL, 
DVD, DVR, 
VCR, V-AUX

Selects the corresponding input source as the 
background video source.

Off

Does not play the video source in the 
background.