Yamaha RX-V561 Manual De Usuario

You can use the following parameters in “SET MENU” to adjust a variety of system settings and customize the way this 
unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening 
environment.

■ Auto setup

 AUTO SETUP

Use this feature to automatically adjust speaker and system parameters (see page 24).

■ Manual setup  

MANUAL SETUP

Use this feature to manually adjust speaker and system parameters.

1 SOUND MENU

Use this menu to manually adjust any speaker settings, alter the quality and tone of the sound output by the system or 
compensate for video signal processing delays when using LCD monitors or projectors.

2 INPUT MENU

Use this menu to manually reassign the input jacks, select the input mode or rename the input source.

A)SPEAKER SET

Selects the size of each speaker, the speakers for low-frequency signal output, and the 
crossover frequency, and the location of the front speakers connected to the FRONT B 
terminals.

48

B)SP LEVEL

Adjusts the output level of each speaker.

50

C)SP DISTANCE

Adjusts the distance of each speaker.

50

D)CENTER GEQ

Adjusts the tonal quality of the center speaker.

51

E)LFE LEVEL

Adjusts the output level of the LFE channel for Dolby Digital or DTS signals.

51

F)D.RANGE

Adjusts the dynamic range of Dolby Digital or DTS signals.

51

G)AUDIO SET

Adjusts the muting level, audio delay, maximum volume level and initial volume level.

51

A)INPUT ASSIGN

Assigns the input jacks of this unit according to the component to be used.

52

B)INPUT RENAME

Changes the name of the input source.

53

C)VOLUME TRIM

Adjusts the output volume of each input source.

53

D)DECODER MODE

Selects the decoder mode for the sources connected to the DIGITAL INPUT jacks on the 
rear panel of this unit.

53

E)MULTI CH SET

Selects the video source played in the background of the sources input from the MULTI CH 
INPUT jacks.

54