Yamaha RX-V561 Manual De Usuario

■ Center speaker equalizer  

D)CENTER GEQ

Use this feature to adjust the built-in 5-frequency band 
(100Hz, 300Hz, 1kHz, 3kHz and 10kHz) graphic 
equalizer for the center channel so that the tonal quality of 
the center speaker matches that of the front speakers. You 
can make adjustments while listening to the currently 
selected source component or a test tone.

Control range: –6.0 to +6.0 dB
Control step: 0.5 dB
Initial setting: 0 dB

TEST

Use this feature to make adjustments for “CENTER GEQ” 
while listening to a test tone.

Choices: OFF, ON
• Select “OFF” to stop test tones and output the currently 

selected source component.

• Select “ON” to output test tones from the center and 

front left speakers.

■ Low-frequency effect level  

E)LFE LEVEL

Use this feature to adjust the output level of the LFE (low-
frequency effect) channel according to the capacity of 
your subwoofer or headphones. The LFE channel carries 
low-frequency special effects which are only added to 
certain scenes. This setting is effective only when this unit 
decodes Dolby Digital or DTS signals.
Control range: –20 to 0 dB
Control step: 1 dB

  SPEAKER

Adjusts the speaker LFE level.

  HEADPHONE

Adjusts the headphone LFE level.

Depending on the settings of “LFE/BASS OUT” (see page 49), 
some signals may not be output at the SUBWOOFER OUTPUT 
jack.

■ Dynamic range  

F)D.RANGE

Use this feature to select the amount of dynamic range 
compression to be applied to your speakers or 
headphones. This setting is effective only when this unit is 
decoding Dolby Digital and DTS signals.

  SP

Adjusts the speaker compression.

  HP

Adjusts the headphone compression.

Choices: MIN, STD, MAX
• Select “MIN” (minimum) if you regularly listen at low 

volume levels.

• Select “STD” (standard) for general use.
• Select “MAX” (maximum) to preserve the greatest 

amount of dynamic range.

■ Audio settings  

G)AUDIO SET

Use this feature to adjust the overall audio settings of this 
unit.

  MUTE TYPE

Use this feature to adjust how much the mute function 
reduces the output volume (see page 36).
Choices: FULL, –20dB
• Select “FULL” to completely mute all the audio 

output.

• Select “–20dB” to reduce the current volume by 20 dB.

  A.DELAY

Use this feature to delay the sound output and synchronize 
it with the video image. This may be necessary when 
using certain LCD monitors or projectors.
Control range: 0 to 160 ms
Control step: 1 ms

1 SOUND MENU

D)CENTER GEQ
TEST

>OFF

ON

. 100Hz ;;;;;;

0.0dB

300Hz

;;;;;;

0.0dB

1kHz

;;;;;;

0.0dB

3kHz

;;;;;;

0.0dB

10kHz

;;;;;;

0.0dB

[ ]/[ ]:Up/Down

p

p

p

[

[ ]/[ ]:Adjust

E)LFE LEVEL

. SPEAKER;;;;;;0dB

HEADPHONE

;;;;0dB

[ ]/[ ]:Up/Down

p

p

p

[

[ ]/[ ]:Adjust

1 SOUND MENU

F)D.RANGE

. SP D.R;;;;MAX

HP D.R

;;;;MAX

[ ]/[ ]:Up/Down

p

p

p

[

[ ]/[ ]:Adjust

1 SOUND MENU

G)AUDIO SET

. MUTE TYPE;;;FULL

A.DELAY

;;;;;;0ms

MAX VOL.

;;;+16dB

INI.VOL.

;;;;;OFF

[ ]/[ ]:Up/Down

p

p

p

[

[ ]/[ ]:Adjust

1 SOUND MENU