Yamaha RX-V461 Manual De Usuario

Descargar
Página de 93
32
 En
Playback
■ Enjoying pure hi-fi stereo sound
The DIRECT STEREO mode allows sources to bypass the 
decoders and DSP processors of this unit so that you can 
enjoy pure hi-fi sound from 2-channel PCM and analog 
sources.
Press C
DIRECT STEREO (or set the operation 
mode selector (
K) to 
AMP and then press 
T
DIRECT ST.) to select “DIRECT STEREO”.
• To avoid unexpected noise, do not play CDs encoded in DTS 
when the DIRECT STEREO mode is selected.
• When multi-channel signals (Dolby Digital and DTS) are input, 
this unit automatically switches to the corresponding analog 
input.
• No sound will be output from the subwoofer.
• “TONE CONTROL” (see page 30) and “SOUND MENU” (see 
page 51) settings (except for speaker level settings) are not 
effective.
• The front panel display automatically dims.
■ Adjusting the tonal quality
Press 0
TONE CONTROL repeatedly to select 
“BASS” or “TREBLE” and then press 
A
PROGRAM l / h to adjust the corresponding 
frequency response level.
• Select “BASS” to adjust the low-frequency response.
• Select “TREBLE” to adjust the high-frequency 
response.
• Speaker and headphone adjustments are stored independently.
• If you increase or decrease the high-frequency or low-frequency 
sound to an extreme level, the tonal quality of the surround 
speakers may not match that of the front left and right speakers.
■ Adjusting speaker levels during 
playback
You can adjust the output level of each speaker while 
listening to a music source.
This operation will override the level adjustments made in 
“AUTO SETUP” (see page 22) and “SP LEVEL” (see page 53).
1
Set the operation mode selector (K) to 
AMP 
and then press C
LEVEL repeatedly to 
select the speaker you want to adjust.
y
Once you press CLEVEL on the remote control, you can 
also select the speaker by pressing Dk / n.
2
Press Dl / h on the remote control to 
adjust the speaker output level.
The control range is from +10 dB to –10 dB.
y
You can press 4 A/B/C/D/E to select a speaker and then 5 
PRESET/TUNING/CH l / hto adjust the speaker output level.
Notes
Notes
Note
Display
Adjusted speaker
FRONT L
Front left speaker
FRONT R
Front right speaker
CENTER
Center speaker
SUR.L
Surround left speaker
SUR.R
Surround right speaker
SWFR
Subwoofer