Yamaha RX-V620RDS Manual De Usuario

■ Remote control

Wrong distance or angle.

The remote control will function within a
maximum range of 6 m (20 feet) and no more
than 30 degrees off-axis from the front panel.

Direct sunlight or lighting (from an
inverter type of fluorescent lamp, etc.) is
striking the remote control sensor of this
unit.

Reposition the unit.

The batteries are weak.

Replace all batteries with new ones.

The component to be controlled has not been
selected.

Set the selector dial to the appropriate position,
corresponding to the component to be
controlled.

The remote control cannot control system
components.

The manufacturer code has not been set up
properly.

Enter the code again.

Try setting another code for the same
manufacturer.

Depending on the manufacturer or the
model, some components cannot be
controlled with this unit’s remote control
even though the code has been set up
properly.

Use the original remote control supplied with
your component.

8

—

3

48

—

53

—

After this unit has been exposed to a strong external electric shock (such as lightning and strong static electricity) or if
you mishandle the operation of this unit, it may not function properly. In these cases, set this unit in the standby mode,
disconnect the power cord, plug it back in after 30 seconds, and start operating.

0112V620RDS_63-71_EN

1/18/1, 7:27 PM

67