Yamaha RX-Z7 Manual De Usuario

This unit has four HDMI input jacks and two HDMI output jacks for digital audio and video signal input/output.

■ HDMI jack and cable plug

y

• We recommend that you use a commercially available HDMI cable 

shorter than 5 meters (16 feet) with the HDMI logo printed on it.

• Use a conversion cable (HDMI jack 

↔

 DVI-D jack) to connect this 

unit to other DVI components.

• You can check the potential problem about the HDMI connection 

• If you set “Mode” in “Standby Through” to “Last” or “Fix”, this 

unit allows the HDMI signals input at an HDMI IN jack to pass 
through this unit and output at an HDMI OUT jack (page 101).

• This unit is equipped with two HDMI OUT jacks. You can select 

the active HDMI OUT jack(s) (

• This unit is equipped with the video conversion function (page 22).

• Do not disconnect or connect the cable or turn off the power of 

the HDMI components connected to the HDMI OUT jacks of 
this unit while data is being transferred. Doing so may disrupt 
playback or cause noise.

• The HDMI OUT jacks output the audio signals input at the 

HDMI input jacks only.

• If you turn off the video monitor connected to the HDMI OUT 

jacks via a DVI connection, the connection may fail.

■ HDMI signal compatibility with this unit

y

• If the input source component can decode the bitstream audio 

signals of audio commentaries, you can play back the audio sources 
with the audio commentaries mixed down by using the following 

connections:
– multi-channel analog audio input (page 27)
– DIGITAL INPUT OPTICAL (or COAXIAL)

• Refer to the instruction manuals of the input source component, 

and set the component appropriately.

• When CPPM copy-protected DVD audio is played back, video and 

audio signals may not be output depending on the type of the DVD 
player.

• This unit is not compatible with HDCP-incompatible HDMI or 

DVI components.

• To decode the audio bitstream signals on this unit, set the input 

source component appropriately so that the component outputs the 
audio bitstream signals directly (does not decode the bitstream 
signals on the component).

• This unit is not compatible with the audio commentary features (for 

example, the special audio contents downloaded via Internet) of 
Blu-ray Disc or HD DVD. This unit does not play back the audio 
commentaries of the Blu-ray Disc or HD DVD contents. 

Video signals
This unit is compatible with the video signals of the 
following resolutions:

– 480i/60 Hz
– 576i/50 Hz
– 480p/60 Hz
– 576p/50 Hz
– 720p/60 Hz, 50 Hz
– 1080i/60 Hz, 50 Hz
– 1080p/60 Hz, 50 Hz, 24Hz

Compatibility with Deep Color and x.v.Color 
video signals
This unit accepts Deep Color (30 or 36-bit) and x.v.Color 
video signals. To output those video signals from the 
HDMI OUT jacks without any processing, set “HDMI ` 
HDMI” (

) to “Through”.

If the video monitor is not compatible with Deep Color or 
x.v.Color video signals, the video source may not be played 
back correctly.

■ Default input assignment of HDMI input 

2ch Linear 
PCM

2ch, 32-192 kHz, 
16/20/24 bit

CD, DVD-Video, 
DVD-Audio, etc.

Multi-ch 
Linear PCM

8ch, 32-192 kHz, 
16/20/24 bit

DVD-Audio, etc.

DSD

2/5.1ch, 
2.8224 MHz,1 bit

SA-CD, etc.

Bitstream

Dolby Digital, 
DTS

DVD-Video, etc.

Bitstream (High 
definition audio)

Dolby TrueHD, 
Dolby Digital Plus, 
DTS-HD Master 
Audio, DTS-HD 
High Resolution 
Audio

Blu-ray Disc,
HD DVD, etc.

IN1

BD/HD DVD

IN2

DVD

IN3

CBL/SAT

IN4

DVR

Front HDMI IN jack

V-AUX