Yamaha RX-Z7 Manual De Usuario

Move the optimizer microphone to the 
position “3”on the microphone base and 
then press 9

ENTER.

“Measurement Completed Successful” appears once 
all items are measured.

Press 9

ENTER to exit from the “Result” 

y

To view the measurement results in detail, press 9h. 
Press 9k / n repeatedly to toggle between parameters 
(page 36). Press 9l to return to the “Result” screen.

Press 9l to select “Yes” to save the 
measurement results or 9h to select “No” 
to discard them.

Press I

MENU to turn off the GUI menu and 

■ Error and warning messages

If an error or warning message appears during the 
automatic setup procedure, carry out one of the following 
operations. For details on each message, see “Automatic 
setup” (page 145).
• To view the details on the error and warning messages, 

press 9h. Press 9k / n to display the previous/next 
page (if available). Press 9l to return to the previous 
menu level.

• To return to the GUI menu, press 9l.
• To retry the measurement, press 9k.
• To ignore the message and continue the process, press 

9

n.

Some operations cannot be performed depending on the type of 
error (or warning).

Use this feature to optimize the setup of this unit for 
multiple listening positions. You can also select the 
parameters to be optimized by the automatic setup.

Place the optimizer microphone at the first 
listening position.
The following illustration shows how to place the 
optimizer microphone in order to optimize the setup 
of this unit for seven listening positions for example.

1/2/3/4/5/6/7: Listening positions

Press I

MENU on the remote control.

The GUI menu appears in the video monitor.

Press 9k to select “Setup Menu” and then 
press 9h.

Press 9k / n repeatedly to select “Multi 
Measure” and then press 9h.

1

7

2

6

4

3

5