Yamaha RX-Z7 Manual De Usuario

y

The results of the measurement that are the causes of the 
warning message(s) appear in yellow or pink.

• “–––” appears when no speaker is connected to the 

corresponding speaker channel or this unit does not measure the 
corresponding speaker channel yet.

• If you change speakers, speaker positions, or the layout of your 

listening environment, run the automatic setup again to 
recalibrate your system.

• The distances displayed in the “Distance” results may be longer 

than the actual distance depending on the characteristics of your 
subwoofer or external amplifiers if you connect them.

• In the “Equalizing” results, different values may be set for the 

same band to provide finer adjustments.

To reload the displayed parameter, press 
9

ENTER.

Press I

MENU to turn off the GUI menu.

y

• You can also set the parametric equalizer type with “PEQ 

Select” (page 96).

• You can set the phase of the connected subwoofer with “Phase” 

(page 93).