Yamaha HTR-5830 Manual De Usuario

■ Playing Dolby Digital EX or DTS ES

Press 6.1/5.1 to turn on the Dolby Digital + Matrix 6.1 or
DTS + Matrix 6.1 decoder.

The display changes AUTO

→Matrix 6.1→OFF each time

6.1/5.1 is pressed.
AUTO:

Automatically switches Dolby Digital +
Matrix 6.1 and DTS + Matrix 6.1 depending
on the signal. Virtual surround back speaker
does not work for 5.1- channel sources.

Matrix 6.1: Produces 6-channel playback of the input

source using the Matrix 6.1 decoder. The
virtual surround back speaker can be used
when playing a 5.1-channel source.

OFF:

Virtual surround back speaker does not
work.

• Some 6.1-channel compatible discs do not have a signal (flag)

that this unit can automatically detect. Select “Matrix 6.1” to
play these kinds of discs with 6.1-channel sound.

• 6.1-channel playback is not possible even if you press 6.1/5.1

in the following cases:
– When effects are turned off.
– When the source connected to the 6CH INPUT jacks is

being played.

– When the unit is reproducing a Dolby Digital KARAOKE

source.

– When headphones are connected to the PHONES jack.

• The 6.1/5.1 setting resets to AUTO when you turn the unit

power off.

■ Selecting PRO LOGIC or PRO LOGIC II

You can listen to 2-channel sources decoded into four
discrete channels by selecting PRO LOGIC or five
discrete channels by selecting PRO LOGIC II in program
No. 9 (refer to the list on page 32).

Press q/DTS.

The display cycles as follows each time you press q/
DTS:
PRO LOGIC

→PRO LOGIC Enhanced→PRO LOGIC II

Movie

→PRO LOGIC II Music→PRO LOGIC→....

y

• You can select PRO LOGIC, PRO LOGIC Enhanced, PRO

LOGIC II Movie, and PRO LOGIC II Music

 by pressing

PROGRAM l / h on the front panel repeatedly.

(Example)

AUTO:---

PRO LOGIC

01EN_24-29_HTR-5830_U.p65

12/17/04, 9:22 AM

28