ONKYO TX-NR5007 Manual De Usuario

70

When “Speakers Type(FrontB)” setting is set to “Not 
Use”, you can select the priority of the use of Front High 
or Front Wide speakers.

Notes:
• Front High or Front Wide speakers cannot be selected 

in either of the following cases:
1. “Speakers Type(FrontB)” is set to “Bi-Amp”, 

“BTL”, or “Normal” (page 57).

2. Powered Zone 2 is being used (page 134).

• When the listening mode that doesn’t support Front 

High or Front Wide speakers is used, the setting can-
not be selected.

• If you use surround back speakers, the speaker selec-

tion will be based on the combination of surround 
back and front high speakers, or surround back and 
front wide speakers.

When “Speakers Type(FrontB)” setting is set to other 
than “Not Use”, you can choose which of the speakers 
you want to use with the Speakers A or Speakers B con-
figuration. Speakers A or B can be switched regardless 
of listening modes.

Notes:
• When you use Speakers B configuration, you cannot 

use front high and front wide speakers.

• When you use Speakers B configuration, listening 

modes that require front high or front wide speakers 
such as Dolby Pro Logic IIz Height or Audyssey 
Dynamic Surround Expansion™ are unavailable.

• While you are using Speakers B, you cannot use 

Audyssey MultEQ

®

 XT Room Correction and 

Speaker Setup (Audyssey Dynamic EQ™ and 
Audyssey Dynamic Volume™).

You can connect a pair of stereo headphones (1/4-inch 
phone plug) to the AV receiver’s PHONES jack for pri-
vate listening, as shown.

Notes:
• Always turn down the volume before connecting your 

headphones.

• While the headphones plug is inserted in the PHONES 

jack, the Headphone indicator, speaker/channel indi-
cator FL and FR light up. (The Powered Zone 2/3 
speakers are not turned off.)

• When you connect a pair of headphones, the listening 

mode is set to Stereo, unless it’s already set to Stereo, 
Mono, Direct, Pure Audio or DTS Surround Sensa-
tion.

• Listening mode automatically changes into DTS sur-

round sensation when you connect a pair of head-
phones while DTS surround sensation mode is 
currently selected.

• The following listening modes can be used with head-

phones (the listening modes available also depend on 
the currently selected input source): Stereo, Direct, 
Pure Audio, Mono and DTS Surround Sensation.