ONKYO HT-RC370 Manual De Usuario

En

■

`

Through:

Select this to pass video through the AV receiver at 
the same resolution and with no conversion.

`

Auto:

Select this to have the AV receiver automatically 
convert video at resolutions supported by your TV.

`

480p (480p/576p), 720p, 1080i, 1080p

Select the desired output resolution.

`

1080p/24:

Select this for 1080p output at 24 frames per second.

`

4K Upscaling:

Select this for an output resolution four times that of 
1080p, resulting in 3840 × 2160 pixels.

You can specify the output resolution for the HDMI OUT 
and have the AV receiver upconvert the picture resolution 
as necessary to match the resolution supported by your 
TV.

• Depending on the incoming video signal, the video playback 

may not be smooth or the vertical resolution may be lowered. In 
this case select anything other than “1080p/24”.

If you connect a video component to an HDMI input, you 
must assign that input to an input selector. For example, if 
you connect your Blu-ray Disc/DVD player to HDMI 
IN 2, you must assign “HDMI2” to the “BD/DVD” input 
selector.
If you’ve connected your TV to the AV receiver with an 
HDMI cable, composite video, S-video and component 
video sources can be upconverted

*

 and output by the 

HDMI output. You can set this for each input selector by 
selecting the “- - - - -” option. See “Video Connection 
Formats” for more information on video signal flow and 
upconversion (

Here are the default assignments.

■

BD/DVD, VCR/DVR, CBL/SAT, GAME, PC, 
TV/CD, PHONO, PORT

`

HDMI1, HDMI2, HDMI3, HDMI4, HDMI5, 
HDMI6:

Select a corresponding HDMI input to which the 
video component has been connected.

`

- - - - -:

Output composite video, S-Video, and component 
video sources from the HDMI output. The video 
output signal from the HDMI output is the one 
configured in “Component Video Input” 
(

page 45). 

*1

If you connect your personal computer to PC IN (Analog 
RGB), you must assign “- - - - -” to the “PC” input selector.

Each HDMI input cannot be assigned to two input 
selectors or more. When HDMI1 - HDMI6 have already 
been assigned, you must first set any unused input 
selectors to “- - - - -” or you will be unable to assign 
HDMI1 - HDMI6 to other input selectors.

*1

FRONT (Fixed)

Composite video, S-Video, 

component video

HDMI

HDMI

Composite video, S-Video, 

component video