ONKYO TX-SA705 Manual De Usuario

39

Connecting the AV Receiver/AV Amplifier—Continued

■ CD Player or Turntable (MM) with Built-in Phono Preamp

• With connection 

, you can listen to and record audio from the CD player and listen in Zone 2.

• To connect the CD player digitally, use connection 

 or 

. (For recording, use 

 and 

, or 

 and 

.)

■ Turntable (MM) with no Phono Preamp Built-in 
The AV receiver/AV amplifier’s PHONO IN is designed 
for use with a moving magnet (MM) type cartridge.
Use an analog audio cable to connect the AV 
receiver/AV amplifier’s PHONO IN L/R jacks to the 
audio output on your turntable.

Notes:
• If your turntable has a ground wire, connect it to the 

AV receiver/AV amplifier’s GND screw. With some 
turntables, connecting the ground wire may produce 
an audible hum.
If this happens, disconnect it.

• If your turntable has a moving coil (MC) type car-

tridge, you’ll need a commercially available MC head 
amp or MC transformer. Connect your turntable to the 
head amp or transformer, and connect that to the AV 
receiver/AV amplifier’s PHONO IN L/R jacks.

• You can also use a phono equalizer to connect a turn-

table with an MC-type cartridge. See your phono 
equalizer’s manual for details.

CD IN L/R



Analog audio L/R output

DIGITAL COAXIAL IN 2 

(VCR/DVR)



Digital coaxial output

DIGITAL OPTICAL IN 2 (CD)



Digital optical output

Step 1:
Choose a connection that matches your CD player (

, 

, or 

). Use connection 

 for a turntable with a built-in 

phono preamp.

Connect one or 
the other
Connection
must be 
assigned (see 
page 51)