Pioneer VSX-609RDS Manual De Usuario
Connecting Your Equipment
12
En
7 To improve FM reception
Connect an external FM antenna.
7 To improve AM reception
Connect a 5 – 6 meter length of vinyl-coated wire to the AM
antenna terminal without disconnecting the supplied AM loop
antenna.
For the best possible reception, suspend horizontally outdoors.
antenna terminal without disconnecting the supplied AM loop
antenna.
For the best possible reception, suspend horizontally outdoors.
Using external antennas
PAL connector
75
Ω
coaxial cable
Outdoor antenna
Indoor antenna
(Vinyl-coated
wire)
(Vinyl-coated
wire)
5 – 6 m
Antennas
Hook up the supplied radio antennas as shown below.
Attach to a wall, etc. (if desired) and
face toward the direction providing
the best reception.
face toward the direction providing
the best reception.
Assemble the antenna.
10mm
FM wire antenna
AM loop antenna
Connect the FM wire
antenna and fully extend
vertically along a window
frame, etc.
antenna and fully extend
vertically along a window
frame, etc.
Twist exposed wire strands
together and insert into the
hole, then snap the connector
shut.
together and insert into the
hole, then snap the connector
shut.
7 Speaker terminals
1 Twist exposed wire
strands together.
2 Loosen speaker
terminal and insert
exposed wire.
exposed wire.
3 Tighten terminal.
Use good quality speaker wire to
connect the speakers to the
receiver.
1 Twist around 10 mm of bare
connect the speakers to the
receiver.
1 Twist around 10 mm of bare
wire strands together.
2 Unclip the speaker terminal
and insert the wire.
3 Snap shut the speaker termi-
nal to secure.
ª
·
10 mm
VSX-709RDS only