Pioneer VSX-919AH-K Manual De Usuario

En

It is possible to playback files using the USB 
interface on the front of this receiver.

• Push down on the 

PUSH OPEN tab to 

access the 

iPod/iPhone/USB terminal.

Only plug in after you have connected all your 
components to this receiver, including the 
speakers.

• Handle the power cord by the plug part. Do 

not pull out the plug by tugging the cord, 
and never touch the power cord when your 
hands are wet, as this could cause a short 
circuit or electric shock. Do not place the 
unit, a piece of furniture, or other object on 
the power cord or pinch the cord in any 
other way. Never make a knot in the cord or 
tie it with other cables. The power cords 
should be routed so that they are not likely 
to be stepped on. A damaged power cord 
can cause a fire or give you an electric 
shock. Check the power cord once in a 
while. If you find it damaged, ask your 
nearest Pioneer authorized independent 
service company for a replacement.

• The receiver should be disconnected by 

removing the mains plug from the wall 
socket when not in regular use, e.g., when 
on vacation.

• Make  sure  the  blue 

 STANDBY/ON light 

has gone out before unplugging.

• If you have connected speakers with a 6 

Ω

 

impedance, change the impedance setting 
before turning on the power.

USB mass 
storage device

This receiver

1 After this receiver is connected to an AC outlet, a 2 second to 10 second HDMI initialization process begins. You 

cannot carry out any operations during this process. The 

HDMI indicator in the front panel display blinks during this 

process, and you can turn on this receiver once it has stopped blinking. When you set the 

KURO LINK mode to OFF, 

you can skip this process. For details about the 

KURO LINK feature, see KURO LINK on page 60.

VSX-1019_KU.book  Page 35  Thursday, January 8, 2009  12:01 PM