Sony STR-DA1800ES Manual De Usuario
63
US
D:\NORM'S JOB\SONY HA\SO120031\STR-DA1800ES_PMRF
02\4428194122_USFR\US04GET_STR-DA1800ES-CEL.fm
02\4428194122_USFR\US04GET_STR-DA1800ES-CEL.fm
masterpage: Right
STR-DA1800ES
4-428-194-12(2)
4-428-194-12(2)
T
u
n
e
r Op
era
tio
ns
2
Select “
FM” or “
AM” from
the menu, then press
or
b.
The FM or AM menu list appears on the
TV screen.
TV screen.
1
Select “Auto Tuning”, then
press
press
or
b.
2
Press
V/v.
Press
V to scan from lower to higher
frequency stations, press
v to scan from
higher to lower stations.
The receiver stops scanning whenever a
station is received.
The receiver stops scanning whenever a
station is received.
In case of poor FM stereo
reception
reception
1
Tune in the station you want to listen to
using Auto Tuning, Direct Tuning
using Auto Tuning, Direct Tuning
2
Press TOOLS/OPTIONS.
3
Select “FM Mode”, then press
or
b.
4
Select “MONO”, then press
.
You can enter the frequency of a station
directly by using the numeric buttons.
directly by using the numeric buttons.
1
Select “Direct Tuning”, then
press
press
or
b.
2
Press SHIFT, then press
numeric buttons to enter the
frequency.
numeric buttons to enter the
frequency.
Example 1: FM 102.50 MHz
Select 1
Select 1
b 0 b 2 b 5 (b 0*)
Example 2: AM 1,350 kHz
Select 1
Select 1
b 3 b 5 b 0
* Press 0 for Mexico model only.
Tip
Adjust the direction of the AM loop antenna
(aerial) for optimum reception upon tuning to
an AM station.
(aerial) for optimum reception upon tuning to
an AM station.
3
Press .
If you cannot tune to a station
“– – – .– – MHz” or “– – – – kHz” appears and
then the screen returns to the current
frequency.
Make sure you have entered the right
frequency. If not, repeat step 2. If you still
cannot tune to a station, the frequency may not
be in use in your area.
then the screen returns to the current
frequency.
Make sure you have entered the right
frequency. If not, repeat step 2. If you still
cannot tune to a station, the frequency may not
be in use in your area.
You can change the AM tuning scale to either
9 kHz or 10 kHz using the buttons on the
receiver.
9 kHz or 10 kHz using the buttons on the
receiver.
1
Press ?/1 to turn off the
receiver.
receiver.
2
While holding down INPUT
MODE, press ?/1 on the
receiver.
MODE, press ?/1 on the
receiver.
The current AM tuning scale is changed
to 9 kHz (or 10 kHz).
To reset the scale to 10 kHz (or 9 kHz),
repeat the procedure above.
to 9 kHz (or 10 kHz).
To reset the scale to 10 kHz (or 9 kHz),
repeat the procedure above.
Notes
• Depending on the settings, the receiver may take
some time to change the AM tuning scale.
• All preset stations will be erased when you change
the tuning scale.
Tuning to a station
automatically (Auto Tuning)
automatically (Auto Tuning)
Tuning to a station directly
(Direct Tuning)
(Direct Tuning)
FM
AM
Changing the AM tuning scale
?/1
INPUT MODE